Smart Muscle Stimulator With Hot Version

Product Specification

Name	Smart Muscle Stimulator
Mode	8 (20level)
Output Strength	0-20
Heat	10-38℃
Material	ABS+PU
Working voltage	3.7V/30mA
working time	15-25mins
Battery cataicity	1500mA
Power	3.7V Polymer lithium battery
Body weight	50g
Size	60*50*10mm
Carton Package	Device ,Manual , 1pc heat pad , 1 remote controlor USB charger wire
Certificate	ISO13485, MDR

Product Feature

The principle of EMS fitness is to transmit micro – current signals to the human
body through EMS equipment . The frequency of micro – current signals is in the
range of 40HZ to 2500HZ( It belongs to the middle and low frequency current ,
and can only impact the muscle layer ). The human body recognizes these current signals as human bio – electricity signal .

The signal can stimulate muscle contraction and achieve the purpose of reducingfat and slimming .

EMS provides users with a weight – free fitness method , which avoids the body
damage caused by traditional fitness method or lack of professional guidance .

The biggest advantage of EMS is high efficiency and low frequency . It is reported
that use high – quality EMS training massage patch for 20 minutes is equivalent to
120 minutes of exercise in the gym . Inferior massage patches can ‘ t do it well so
as to can ‘ t achieve goals of fitness and weight loss .

Product Instruction 

1. Take out the massage patch package and install the host on the massage pad.
   2. Remove the transparent protective film from the massage patch .
   3. Attach the massage patch installed on the host to the body part to be massaged .
   4. Power – on operation ( shutdown state ): Long press ” M ” key for about two seconds to power on ,and the middle indicator lights up . Press the “+” key to increase the strength and start working . The indicator light blinks when working . The default startup strength is level 0.
   5. Press the “-” key to reduce the strength .
   6. Replacement mode : After starting , press ” M ” to select the mode , and then press “+” to increase the strength to start operation ; The mode can also be replaced in the working process . The default strength is level 1 after the mode is replaced . For heating , After power – on , press the ” heating ‘ button to start the heating function . The heating level is “3”, and the heating button increases with each press One gear , press the heating display icon to turn off the heating function .
   7. Power off : Continue to press the “-” key to weaken the strength until the indicator light off .
   8. After the machine is shut down , remove the massage patch and cover it with a transparent protective film . Install it and place it in a cool place .
   Tip : When the host detects that the massagepatch leaves the skin for about 10 seconds , it will automatically shut down .

Note

Do not use this product in the following parts , or it may cause physical problems :
①  Brain and heart part .
② Surgical site where plastic surgery was performed .
③Above the neck and head .
④Implanting position with metal and plastic .
⑤Mucosal parts such as wounds , eyes , mouth , and genitals .

⑥The part of the hair removal treatment on that day .
⑦Abdomen during physiological period .
⑧Patient with implanted medical electronic device , such as heart rate regulator . Patient with medical electronic device , such as artificial heart and lung .
Patient with wearable medical electronic instruments such as an electrocardiograph scanner .

In the process of using , if you want to move the electrode pads to other parts or other people ‘ s body , please turn off the power before moving . If you feel unwell due to abnormal use of the product , stop using it immediately . If your body or skin feels uncomfortable , please consult your doctor and follow your doctor ‘ s advice .

Warning 

Please consult your doctor before using in following situations :
Patient who is being treated by doctor and has a physical abnormality .
Malignant tumor patient .
Pregnant women and maternity .
Patient with heart , blood pressure disease and cranial nerve abnormality .
Patient who is taking medication and has a temperature above 38°℃. Patient with Infectious disease .
Patient with skin dysfunction or abnormal skin disease .
Patient with acute disease .
Patient who need to be rested .
Patient with abnormal bleeding .
Patient who are not free to express their wishes .
Patient with sensory impairment due to high peripheral circulatory disorders of diabetes .
Skin is allergic to electrode pads .
Children under 14 years can ‘ t use it .